Application
Many industrial processes require heat: for desorption, evaporation and distillation, or for endothermic reactions with or without a catalyst. It is crucial to deliver the heat as close as possible to the phase boundary or the site of the reaction.
The electrically heated Lessmann strand packing combines a large surface area, uniform heat supply and very low pressure drop.
COâ‚‚ desorption: Heat directly within the packing
Considerable amounts of heat are required to drive COâ‚‚ out of loaded washing liquids. Conventionally, the heat is supplied via a steam-heated reboiler at the column bottom. Generating the steam is energy-intensive and requires additional plant equipment.
The electric resistance wire heating in the Lessmann Adern packing delivers the heat directly to where the COâ‚‚ is to be stripped from the wash liquid. The integrated heating eliminates the need for an external reboiler and the associated steam and condensate systems. This reduces space requirements, as well as installation and maintenance costs.
The large heating surface area enables heat transfer even with a small temperature difference between the heating surface and the liquid. The heating surface therefore only needs to be slightly warmer than the washing liquid. This ensures gentle heating and reduces the thermal stress on the amines.
Heating can be varied according to height and radius and precisely controlled. This allows heat to be applied in line with the requirements of individual areas. The open-vein structure offers little resistance to the gas. Its very low pressure loss reduces the energy required for gas conveyance.
Extremely uniform heating in experiments
In experiments, the structured strand packs were heated extremely uniformly using electric resistance wire heating. In tests with water, the temperature differences measured axially over a length of 1 m and radially in the DN 150 test rig were no more than 1 K. The installed heating capacity was 5 kW.
The advantages:
• Elimination of the external reboiler, including steam and condensate systems: a more compact plant design and reduced installation and maintenance requirements.
• Large heating surface area: heat transfer at a low temperature difference.
• Uniform heating: minimal temperature differences across height and cross-section.
• Precise control: adjustable temperature and heat input zones.
• Gentle heating: lower thermal stress on the washing liquid.
• Very low pressure drop: reduced energy requirements for compressor.
Further applications: heat directly in the process
In many endothermic processes, external heating is complex. Some large conventional reformers operate with more than 500 burners. Fuel and air distribution, as well as temperatures, must be carefully monitored and controlled. Heat is transferred laboriously from the outside through the walls of the reformer tubes to the site of the reaction.
The electrically heated strand packs makes it possible to supply heat directly within the structure through which the gas flows and to control it via height and radius. Interesting applications include, amongst many others:
• Desorption and regeneration of other washing liquids
• Distillation, stripping and evaporation
• Endothermic reactions with and without a catalyst
• Methane pyrolysis for the production of hydrogen and solid carbon
• Ammonia cracking to release hydrogen
• Reforming and CO₂ conversion to produce synthesis gas
• Propane dehydrogenation to produce propylene
In catalytic applications, the heating wires can also serve as catalyst supports. Thanks to a catalytically active coating, heat generation and the chemical reaction take place directly on the same strand pack surface. The required heat is thus supplied directly at the site of the reaction.
Electric heating also enables the use of renewable electricity for process heat. In conjunction with a heat storage system, electricity that is available at certain times can be utilised and the heat transferred to the process at a later stage.
For more information on structured strand packs as highly efficient packing materials, click here.
CONTACT US NOW!
Our high-quality products are backed by around 250 enthusiastic and competent employees.
OUR PRODUCTS
| Image | Art. No. | Description | Brush Diameter | Filling Material |
|---|
Dear customers,
Dear interested parties,
Please note that we will not be available by telephone or e-mail on Thursday, June 4 due to the Corpus Christi holiday and on Friday, June 5 for technical reasons. We ask for your understanding.
From Monday, June 8, we will be available for you again as usual and will process your inquiries.
Your Lessmann GmbH
You need to load content from reCAPTCHA to submit the form. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Google Maps. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from Mapbox. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More InformationYou are currently viewing a placeholder content from OpenStreetMap. To access the actual content, click the button below. Please note that doing so will share data with third-party providers.
More Information